JL AUDIO
M600/6 Full-Range Marine Amplifier
JL AUDIO
M600/6 Full-Range Marine Amplifier
JL AUDIO
M600/6 Full-Range Marine Amplifier
  • Load image into Gallery viewer, JL AUDIO
M600/6 Full-Range Marine Amplifier
  • Load image into Gallery viewer, JL AUDIO
M600/6 Full-Range Marine Amplifier
  • Load image into Gallery viewer, JL AUDIO
M600/6 Full-Range Marine Amplifier

JL AUDIO M600/6 Full-Range Marine Amplifier

Regular price
$1,245.88
Sale price
$1,245.88
Regular price
Sold out
Unit price
per 
Shipping calculated at checkout.

Dimensions 10 1/4" Width x 2 1/16" Height x 7 1/8" Length
Type 6 Channel
Warranty Details Two Years
Wattage 600 Watts

This tiny amplifier packs a serious full-range punch, delivering a staggering 100 watts to each of its six channels.

NexD™ Technology: The breakthrough that makes this much power possible in such a small chassis is JL Audio's NexD™ ultra-high-speed switching design, which allows for full bandwidth Class D operation with extremely low distortion and outstanding efficiency.

Combine with a subwoofer amp: With the M600/6, you have lots of great options. Use it as a six-channel satellite amplifier with 75W x 4 @ 4 Ω, or bridge four of its channels to create a staggered power four-channel amplifier with 200W x 2 @ 4 Ω to one pair of satellites and 75W x 2 @ 4 Ω to a secondary pair of satellites. You can also drive two subwoofers with 200W each, plus a pair of satellites with 75W x 2.

Filters: The M600/6 includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz.

Remote control: With the addition of an HD-RLC remote level control (sold separately), you have the ability to control the level of two, four or all six of the amplifier's channel levels from a remote location.

Built for the marine environment: This marine amplifier features white and gray powder-coat finishes, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.

Key Features

  • NexD™ amplifier technologies produce exceptional audio quality, unsurpassed total efficiency and high power from very compact amplifier designs
  • JL Audio's exclusive Advanced Rollback Protection circuit monitors the amplifier's thermal condition and adjusts amplifier operation to eliminate annoying amplifier shut-down events
  • Frequency Response: 12 Hz - 22 kHz (+0, -1dB)
  • Signal/Noise Ratio, referred to highest rated power: >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
  • Signal/Noise Ratio, referred to 1 W: >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
  • Damping Factor @ 4 Ω: >150 / 50 Hz
  • Damping Factor @ 2 Ω: >75 / 50 Hz
  • Total Harmonic Distortion + Noise @ Rated Power: <1% @ 2 Ω per Ch.
  • Input Voltage Range @ RCA Inputs: 100 mV - 4 V RMS
  • Min. Copper Power / Ground Wire Gauge: 4 AWG wire
  • Fuse Rating: 40 A (AFS, AGU or MaxiFuse™)
  • Filter Mode(s): Low-Pass or High-Pass
  • Filter Slope(s): 12 dB/octave
  • Filter Frequency Range: 50 Hz - 500 Hz
  • Detented, Calibrated Filter Freq. Potentiometers: Yes
  • Filter Defeat Function: Yes
  • Remote Level Control: Optional (HD-RLC)
  • Remote Level Modes: 2 or 4 or all channels
  • Channel Input Mode Switch: Yes (2/4/6 ch.)
  • Pass-Through Preamp Output: Buffered
  • Source Channel Selection for PreOuts: Yes

Mfg. # 98272

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)